Following is the new settings required for the Striven Scan app.


Action

1

Touch the all apps icon at the bottom of the screen/swipe from the bottom middle of the home screen.

image-20240412-004732.png

2

Swipe from the right of the screen to the left until you see the settings app.

image-20240412-004050.png

3

Scroll up until you see the ScanSettings category then select it.

image-20240412-004835.png

4

Select Basic

image-20240412-004907.png

5

Under Wedge mode

Select Result type

Then click on Keyboard Event (Single)

image-20240412-005046.png

image-20240412-004949.png

6

Select Terminator

Then LF

image-20240412-005105.png

image-20240412-005125.png

7

Select the back button on the bottom.

hen select "Wedge"

image-20240412-005214.png

8

Select Prefix

image-20240412-005307.png

9

Select the "?123" button on the keyboard

Then select the "=\<" button

10

Select the backtick button then OK.

image-20240412-011237.png

11

Press the Home button then the Striven Scan app.

12

NOTE:

If installing on a Device without a bar-code scanner (e.g. Tablet or Phone).

There is a new 3rd Party bar-code photo app called Binary Eye that can be installed.