IT IS ABSOLUTELY essential that you install the BHT Drivers BEFORE you plug the USB device into the computer for the first time.

Use the driver in:

S:\RBI\Workstation\Drivers\BHT-904B Active USB-COM Port Driver\ActiveUSBCOM_E20016\Setup.exe

Step	Action
	Ensure Power is turned off (on the Nippon).
	Hold Down ‘SFT’ + ‘0’ + ‘M1’ + ‘PWR’ keys, it will come up with a message ‘INITIALIZE SYSTEM' - 1:USER AREA EXCEPT FONTS’ Select ‘ENGLISH’ then press 'ENT' Select 'Yes’ and press 'ENT' The unit will now Initialise and will then power off.
	Power on the unit, by pressing the ‘SF’ + ‘1’ + ‘PWR’ keys. The following menu will appear SYSTEM MENU 0:SETUP 1:EXECUTE PROGRAM 2:DOWNLOAD 3:UPLOAD 4:SET SYSTEM 5:TEST 6:VERSION 7:FTP 8:DEVICE Choose option ‘4:SET SYSTEM’ and press the ‘ENT’ key.
	The following menu will appear SET SYSTEM 1:EXECUTE PROGRAM 2:DISPLAY 3:DATE/TIME 4:BARCODE 5:COMMUNICATION 6:KEY 7:TCP/IP Choose option ‘2: DISPLAY’ and press the ‘ENT’ key.
	Press ‘SF’ + ‘1’ to change Menu options; then Press '2: COMPATIBLE MODE'. Select 'BHT-8000 FULLSCREEN' (by pressing the -> F8 button 3 times) Press the 'ENT' key. Press 'BS/C' to go back to the previous 'SET SYSTEM' menu. Press the ‘ENT’ key. Then choose option ‘5: COMMUNICATION’ and press the ‘ENT’ key.
	The following menu will appear SET COMMUNICATION 1:OPTICAL 2:CONNECTOR 3:COM PORT 4:PROTOCOL TYPE 5:OPEN”COM: “DETAIL Choose option ‘3:COM PORT’ and press the ‘ENT’ key.
	The following menu will appear SET COM DEFAULT PORT 1:BASIC Optical Connector 2:SYSTEM MODE Optical Connector Both these need to be set to Connector, to do this follow these instructions: Press ‘1’, ’F8’ and then ‘2’, ‘F8’. Choose option ‘1: for BASIC and f8 to arrow right for 'Connector'. Choose option ‘2: for SYSTEM MODE and f8 to arrow right for 'Connector'. Press 'BS/C' twice to go back to the “System” Menu.
	Setup Device to Copy the RBI software file onto it Choose '8: Device' then press the ‘ENT’ key. Press the 'ENT' key on the '1: USB' option. Highlight the 'MTP' Option (Press F7 or F8) and then press ‘BS/C’ TWICE. Select 2: Download from previous menu.
	Now, Connect the Nippon to the PC via the USB Cable. The following popup will appear in Windows: Click on 'Open device to View files'.
	An explorer window will appear: Type in 'S:\WE\Share\Programs\BCUtilities\Software' into the address bar:
	Copy the 'RBI.PD4' file; then go 'BACK' (click Left-Arrow in top-left corner) to the previous folder and Dbl-click the 'Handy terminal' to open the Nippon folder. Paste the 'RBI.PD4' file into the 'Handy Terminal' folder.
	Once the file has been copied, press 'BS/C' to stop copying, then press 'BS/C' again to go back to the previous menu. Choose '8: Device' then press the ‘ENT’ key. Press the 'ENT' key on the '1: USB' option. Highlight the 'COM' Option (Press F7 or F8) and then press ‘BS/C’ TWICE Press the Power button to turn the Nippon off.
	Power on the unit, by pressing the ‘SFT’ + ‘1’ + ‘PWR’ keys to access the menus. Then choose 1 to execute. From the list of available programs please select the RBI.PD4.
	When the software loads up, press 'ENT' to get past the RBI Welcome screen; then press 6: SETUP, 5: SET BAUD RATE. Ensure the BAUD RATE is the same here, as it is in Device Manager (USB COM Port settings-Bits per second) and in the RBI - 'POS Settings' configuration (Port number and Baud Rate). {Normally it is 38400}
	EXTRA STEPS FOR A NEW SETUP (Out Of The Box): Set switch to correct type for Batteries being fitted to handheld unit: Ni-MH - for Rechargable Ni-MH batteries Alkaline - for Standard, non-rechargable Alkaline batteries.
	Before connecting the Nippon to the PC: Setup and Install USB Driver Software: From the \BHT-904B Active USB-COM Port Driver\ folder -Run Setup.exe. -follow the Instructions in 'ActiveUSBCOM_Installation_Guide.pdf'.
	Troubleshooting If nothing happens, check that the Com Port is displayed with “Connected” or “Disconnected” in Device Manager. This is bad: This is good:
	If it doesn’t have those words, then you need to UNINSTALL the BHT USB Driver, reboot. Then reinstall the driver.
	If you find that you still don’t get the “Disconnected” or “Connected” try changing the COM Port number (Properties, Advanced, Change Port Number).
	After changing the COM Port, you MUST Reboot. Ensure speed is 38400 on the Port settings as well.

Browser not supported