Follow the steps below to setup EFTPOS surcharges.
The following need to be done on each machine with a pinpad.
Linkly / PC-EFTPOS
If you are using Linkly (PC-EFTPOS), please use the following steps:
Double click on the green C on the toolbar. | |
Click on Ctrl Panel… button |  |
Double click on the card type you wish to add a surcharge. |  |
Enter in the Surcharge amount. Click on OK to continue. |  |
TYRO
If you are using TYRO, please use the following steps:
Striven POS Settings (all pinpads)
Once those are configured correctly, you need to change the following settings in Striven.
The following need to be done on each machine that has the EFTPOS integration and Surcharges setup on it.
| 1 | In Striven, click on POS POS Settings Click on the POS Settings tab Change Surcharging Mode to Enabled thorugh Pin-Pad |  |
| 2 | Press F9 to save |